
TOA IP-1000AF
Contact
IP-1000AF is an IP audio interface device, it can broadcast the signal received by the audio input interface to other terminals, and it can also receive the broadcast signal from other terminals and servers. It supports browser system settings.
Features
Can be mounted on various surfaces
Can act as both input and output units in the network system
The device can also receive messages from servers and other devices to start broadcasting
Support using browser to change device settings
Description
Specifications:
Power Source DC 24V
Current Consumption Below 85mA
Audio Input 1V rms (Max: 2V rms), unbalanced 10KΩ
Audio Output 1V rms, unbalanced 600Ω
Frequency Response
LINE IN (Sampling Frequency: 22k): 20Hz -10kHz
LINE OUT (MP3/Sampling Frequency: 44k): 40Hz -15kHz
Control Contact Input
Open circuit voltage: 24V DC; short circuit current: ≤5mA
Relay
Normally Closed Contact (NC) Withstand voltage ≤30V DC, control current ≤500mA
Common Contact (COM) Withstand voltage ≤30V DC, control current ≤500mA
Normally Open Contact (NO) Withstand voltage ≤30V DC, control current ≤500mA
Network I/F 10 BASE-T/100 BASE-TX, auto negotiation
Network Protocol UDP, ARP, ICMP, IGMP
Operation Temperature 0°C to +40°C
Operation Humidity Less than 90% RH (no condensation)
Dimension (W) x (H) x (D) 91 x42 x106 mm
Accessory 5P terminal blocks x 1, 4P terminal blocks x1, Plastic foot (10mm*3mm) x4


