
TOA VX-3150DS
Contact
The VX-3150DS is an emergency power management unit used in the VX-3000, SX-2000, VX-2000 and VM-3000 systems. The 3U sized unit features built-in battery charging and dual AC power inputs, minimizing rack space, saving power consumption and being lightweight.
The VX-3150DS features easy operation via function keys and a front power on/off switch, and easy replacement of the protective fuse on the back of the unit.
Description
Specifications:
Power supply 220-230 V AC, 50/60 Hz
Power consumption Total max 1460 W (at rated charging output)
DC output (AC mode)
Rated power: 1140 W (total DC output)
Peak power: 1280 W (total DC output)
Current
Maximum output current from battery: 25 A
Maximum current of continuous output, I max a: 25 A
Maximum current of intermittent output, I max b: 25 A
Minimum output current, I min: 0 A
Ripple voltage at I max b: 4 V max
DC output power
8 x 31 V (19-33 V) 25 A max, M4 screws,
Distance between partitions: 11 mm
3 x 31 V (19-33 V) 5 A max., removable terminal block (3 × 2 pins)
1 x 24 V (16-25 V) 0.3 A max., removable terminal block (1 × 2 pins)
Charging method Temperature-compensated gradual battery charging
Charging output voltage
27.3 V ±0.3 V (at 25 ℃)
Temperature correction coefficient: -40 mV/℃
Battery connection
1 pair of positive and negative terminal blocks
Cable diameter: AWG 6 – AWG 0 (AWG 1/0) (16 mm² – 50 mm²)
Line resistance within 4 m Ω/total
Compatible batteries
Panasonic: LC-X1265PG/APG (65 Ah), LC-XA12100P (100 Ah)
Yuasa: NP65-12 (65 Ah), NPL100-12 (100 Ah)
DS LINK control terminal block Input/output
RJ45 female port for system connection and cascade connection
Multiple-shielded twisted pair cable (TIA/EIA-568A standard)
Control signal type: battery test, AC power status, DC power status, charging circuit fault, battery fault, and communication
Display on the control panel AC input (green), Charging (green), Battery power (green), battery connection (green), battery status (green)
Operating temperature -5 ℃ to +45 ℃
Operating humidity 90 %RH or less (non-condensing)
Front panel material: Surface treated steel plate, black, 30% gloss paint
Dimensions 482 (W) x 132.6 (H) x 400.5 (D) mm
Weight 9.0 kg
Accessories
Fuse (T8A H) x 1, fuse (T6.3A L) x 2, Blade fuse (35 A) x 2,
Rack mounting screws (with washers) x 4, Power cord (2 m) x 2,
Adhesive tape x 4, Adhesive sandpaper x 4, Insulation sheet x 1,
CAT5-STP cable (3 m) x 1, Ferrite clip x 1
Fuse Blade fuse (35 A), fuse (T8A H), fuse (T6.3A L)


