Armatura AHDU Series IP-Based Biometric Door Unit

Description

Specifications:

AHDU-1160 General Information

Power Supply  PoE  802.3at/af / 9 – 24 VDC ± 20%, 550 mA max (excluding reader current)

Master Host Interface
Ethernet: 100Base-TX
256bit AES* symmetric encryption for Controller-to-Server and Controller-to-Controller communication

Slave Host Interface Bluetooth 5.2

Third Host Interface
Wi-Fi IEEE 802.11ac 5GHz, or 2.4GHz/5GHz IEEE 802.11n
256bit AES* symmetric encryption for Controller-to-Server and Controller-to-Controller communication

Ethernet Network Connection
Port 1:Ethernet: 100Base-TX
Port 2: Ethernet: 100Base-TX
(Configurable for Failover Port)

RS-485 Connection
Port 1: Armatura RS-485 / OSDP V2.2
Port 2: Armatura RS-485 / OSDP V2.2
Port 3: Armatura RS-485 / OSDP V2.2
(Configurable for redundant ports 2 & 3)

Number of Ports 2*TCP/IP 3*RS-485 4*Wiegand

Input Port
Monitor 4 states, resistance value (5% tolerance),
Normally open contact: use 1.2k, 2.2k. 4.7k or 10k/
Normally closed contact: use 1.2k, 2.2k. 4.7k or 10k/
Tamper IO Input* Dedicated Control Panel
Dedicated IC Control Fire Alarm IO Input & REX Input for Disaster Situation

Output
AHDU-1160
1 relay, 1* Form-C with dry contacts

Normally Open Contact Rating 5A @ 30Vdc

Normally Closed Contact Rating 5A @ 30Vdc

On-Board Display
Size: 2.4″, Resolution: 320*240, TFT Display
Quickly view the status of the panel, connected doors and display configuration information

On-Board Webserver
Web server for system management and configuration
Control panel for monitoring controller status,
Monitoring & Configuration Device Connection Status, Performance Status,
Server master controller settings, Status settings and monitoring network,
IP Access Filter, SSL/TLS Certificate Setting,
Access Log Export, Controller Reset, Debug Status Monitoring,
Operational Log Monitoring, User Management,
Date & Time Setting, Daylight Saving Time Setting
NTP Server Setting, General Status, Controller Information

RFID Card Capacity 400,000 (1:N) / 800,000 (1:1)

Maximum RFID Card Number Length Supports card number length up to 512 bits

Mobile Authentication Capacity
400,000 (1:N) (Bluetooth)
400,000 (1:N) (NFC)
400,000 (1:N) (Dynamic QR Code)

Fingerprint Capacity 50,000 (1:N) / 100,000 (1:1)

Mold Capacity Faces 5,000 (1:N) / 100,000 (1:1)

Palm Capacity 3,000 (1:N) / 5,000 (1:1)

Transaction Buffer 300,000 events

Access Levels 100,000 levels

On-Board Access Control Points
AHDU-1160
1 on-board access point

On-Board Reader Support
AHDU-1160
3 (OSDP over RS-485) or 1 (Wiegand) with on-board IO

Maximum Access Points 1

Maximum Readers 2

Maximum Inputs 384 (using Armatura AHEB-1602)

Maximum Outputs 385 (using Armatura AHEB-0216)

Maximum IO Board 24pcs (3*High-speed RS-485 communication)

Multi-Biometric / RFID Reader Interface

Input Voltage 12 -24 Vdc +/- 10% adjustable, up to 500 mA per reader

Maximum Input Current 12 – 24 Vdc +/- 10% adjustable, up to 500 mA per reader

Protocol RS-485 AES-128, OSDP Secure Channel

OSDP Mode
9600-115200 bps, OSDP V2.2, asynchronous, half-duplex, 1 start bit, 8 data bits and 1 stop bit.
3rd Party Reader: OSDP V2.2 or later supported

Wiegand Read: supports up to 128 bit / Write: Supports 26/34/37 bit and other custom tag formats

Tamper Input (Wiegand) TTL level, high > 3 V, low < 0.5 V, 5 mA source/sink max

Buzzer Output (Wiegand) TTL level, high > 3 V, low < 0.5 V, 5 mA source/sink max

LED Output (Wiegand) TTL level, high > 3 V, low < 0.5 V, 5 mA source/sink max

Input Data
Supports RS-485, OSDP, and Wiegand standards.
Maximum RS-485/OSDP cable length: 3937ft. (1200m)
Maximum Wiegand Cable Length: 328ft (100m)

IO Expansion Board Interface

RS-485 Protocol AES-128 Secure Channel, OSDP V2

OSDP Mode
9600-115200 bps, OSDP V2.2, asynchronous, half-duplex, 1 start bit, 8 data bits, and 1 stop bit.
Maximum Cable Length: 2,000 ft. (609.6m)

Input Data
OSDP and Wiegand standards supported.
Maximum Cable Length: 500 ft. (152m)

Cable Requirements

Power & Relay One twisted pair, 18 to 16 AWG

Ethernet CAT-5, 330 ft. minimum. (100m)

Ethernet Redundant Switch Port CAT-5, 330 ft. (100m) minimum

RS-485 Reader Port
9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and 1 stop bit.
One twisted pair with conductor and shield, 120 ohm resistor, 22-18 AWG,
Maximum cable length: 3937ft (1200m)

RS-485 I/O Device Port
9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and 1 stop bit.
One twisted pair with conductor and shield, 120 ohm resistor, 22-18 AWG,
Maximum cable length: 3937ft (1200m)

RS-485 Redundant Switch Port
9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and 1 stop bit.
One twisted pair with conductor and shield, 120 ohm resistor, 22-18 AWG,
Maximum cable length: 3937ft (1200m)

Mechanical

Wiegand Port 20 AWG Shielded Wiegand Wire, 328ft. (100m)

Dimensions 4.8” W x 10.2” L x 2.5” H (122 x 260 x 62.5mm)

Weight 30oz (830g)

DIN Rail Mounting
DIN35 Rail Supported
Compatible with UTA89 Din Rail Adapter for Screwing into Switches (Sold Separately)

Wall Mounting

Housing Material ABS-PC UL-94 V2

Environment

Temperature -22°F ~ 158°F (-30°C ~ 70°C), Operation & Storage

Humidity 0-95% RHNC

Security Rating Securely stores data in EAL 5+ Certified Chip