
TOA VX-3000DS
Contact
The VX-3000DS is an emergency power management unit used in the VX-3000, SX-2000, VX-2000 and VM-3000 systems. The 3U sized unit features built-in battery charging and dual AC power inputs, minimizing rack space, saving power consumption and being lightweight.
The VX-3000DS features easy operation via function keys and a front power on/off switch, and easy replacement of the protective fuse on the back of the unit.
Description
Specifications:
Power supply 220-230 V AC, 50/60 Hz
Power consumption
Total max. 2800 W (at rated charging output)
Total max. 650 W, each max. 350 W (EN60065)
DC output (AC mode)
Rated output: 2300 W (Total DC output power)
Peak output: 2780 W (Total DC output power)
Current characteristics
Maximum output current from battery: 50 A
Maximum rated current of continuous output: I max. a: 50 A
Maximum rated current of intermittent output, I max. b: 50 A
Minimum rated output current, I min: 0 A
Ripple voltage at I max b: 4 V max
DC output
8 x 31 V (19-33 V) 25 A max each, M4 screw terminal,
Separation between baffles: 11 mm
3 x 31 V (19-33 V) 5 A max each, detachable connector (3 × 2 pins)
1 x 24 V (16-25 V) 0.3 A max, detachable connector (1 × 2 pins)
Charging method Temperature-controlled trickle charging
Charging output voltage
27.3 V ±0.3 V (at 25 ℃)
Temperature correction coefficient: -40 mV/℃
Battery connection
Including positive and negative terminals
Line Compatible cable diameter: AWG 6 – AWG 0 (AWG 1/0) (16 mm² – 50 mm²)
Speaker line resistance is within 4m Ω/total
Compatible batteries
Panasonic: LC-X1265PG/APG (65 Ah), LC-XA12100P (100 Ah)
Yuasa: NP65-12 (65 Ah), NPL100-12 (100 Ah)
Control Connector DS LINK IN/OUT
RJ45 female port for system connection and cascade
Shielded twisted pair cable (TIA/EIA-568A standard)
Control signal type: battery check, AC power status, DC power status, battery charging circuit fault, battery and connection fault
Control panel AC power IN 1, IN 2 (Green), Charging (Green), Battery power (Green) leaf), Battery connection (Green), Battery status (Green)
Operating temperature -5 ℃ to +45 ℃
Allowable humidity 90 %RH or lower (non-condensing)
Panel material: Surface treated steel plate, black, 30% gloss paint
Dimensions 482 (W) x 132.6 (H) x 400.5 (D) mm
Weight 11.8 kg
Accessories
Fuse (T8A H) x2, fuse (T6.3A L) x2, flat fuse (35 A) x2,
Rack mounting screws (with washers) x4, Power cord (2 m) x2,
Tape x 4, Tape x 4, Insulation sheet x 1,
CAT5-STP cable (3 m x 1, Ferrite clamp x 1
Fuses Flat fuse (35 A), fuse (T8A H), fuse (T6.3A L)

