HOTLINE:

024 3972 8888 (Hanoi Office)028 3834 2217 (HCM Office)

0

No products in the cart.

HOTLINE:

024 3972 8888 (Hanoi Office)028 3834 2217 (HCM Office)

Honeywell 2XD400
Honeywell 2XD400

Honeywell 2XD400

Contact

Variodyn D1 Class-D Power Amplifier | 2 x 400W | 2 Channels

Compatible with the Variodyn D1 PAVA system, the 2XD400 power amplifier is driven by the DOM4-8 or DOM4-24 Digital Output Module. Both the LF input and control input are connected to the DOM via cables. The system provides a power cable.

• 4-channel power amplifier, Class D, 100 V output
• Available in two models: 2 x 250 W / 2 x 400 W
• 80% efficiency factor
• 24 V DC emergency power supply
• Control and monitoring via DOM
• Integrated electronic protection against heat
• Overload and short circuit during output
• EN 54-16 approved, CPD No. 0786-CPD-20997
• VdS approved, VdS No. G210122

Part No. 580232

Categories: , , ,

Description

Specifications:

Type 2XD400

Rated power output (sin.) 2 x 400 W

Voltage consumption (230VAC) 4.5 A

Voltage consumption (24V DC/ Sinus continuous tone*) 40.5 A

Voltage consumption (24 V DC / Announcement / 1/3 load)* 13.9 A

Voltage consumption (24 V DC / Announcement / 1/8 load) * 5.6 A

Power consumption in standby mode (230 V)separated f. mains supply approx. 0 VA

Dissipation loss / 230 V AC (Idle) 30 W max.

Dissipation loss / 24 V DC (channels off) 3 W max

Dissipation loss / 24 V DC (channels on) 12 W max

Weight approx. 16.5 kg

Nominal voltage 230 V AC

Nominal frequency 50 to 60 Hz, +10% / -5%

Emergency power supply 24 V DC

Functional principle Class D

Transmission frequency band (-1 dB) 50 Hz to 22 kHz

Signal-to-noise ratio >90 dB, A – unweighted

Harmonic distortion at full load / 1 kHz < 0.03 % Channel separation > 42 dB

Input impedance > 20 k, Ωe l. balanced

Ambient temperature during operation 5 °C to +55 °C

Relative humidity 40% to 93%, (no condensation)

Housing color gray, similar to RAL 7016

Dimensions (B x H x T) 483 x 88 x 402 mm / 2 HU, 19”

Related products