HOTLINE:

024 3972 8888 (Hanoi Office)028 3834 2217 (HCM Office)

0

No products in the cart.

HOTLINE:

024 3972 8888 (Hanoi Office)028 3834 2217 (HCM Office)

Honeywell 2XD250
Honeywell 2XD250

Honeywell 2XD250

Contact

The 2XD250 power amplifier offers superior control and monitoring via the Variodyn D1 DOM. It provides advanced electronic protection against thermal overload and short circuit during output. A low voltage socket for connecting the mains voltage and a mains fuse are located on the rear. The power amplifier can only be operated via a three-wire power supply system with a protective ground wire.

• 4-channel power amplifier, Class D, 100 V output
• Available in two models: 2 x 250 W / 2 x 400 W
• 80% efficiency factor
• 24 V DC emergency power supply
• Control and monitoring via DOM
• Integrated electronic protection against heat
• Overload and short circuit during output
• EN 54-16 approved, CPD No. 0786- CPD-20997
• VdS approved, VdS No. G210122

Part No. 580231

Categories: , , ,

Description

Specifications:

Type 2XD250

Rated power output (sin.) 2 x 250 W

Voltage consumption (230VAC) 2.8 A

Voltage consumption (24V DC/ Sinus continuous tone*) 25 A

Voltage consumption (24 V DC / Announcement / 1/3 load)* 8.75 A

Voltage consumption (24 V DC / Announcement / 1/8 load) * 3.6 A

Power consumption in standby mode (230 V)separated f. mains supply approx. 0 VA

Dissipation loss / 230 V AC (Idle) 25 W max.

Dissipation loss / 24 V DC (channels off) 3 W max.

Dissipation loss / 24 V DC (channels on) 10 W max.

Weight approx. 16.5 kg

Nominal voltage 230 V AC

Nominal frequency 50 to 60 Hz, +10% / -5%

Emergency power supply 24 V DC

Functional principle Class D

Transmission frequency band (-1 dB) 50 Hz to 22 kHz

Signal-to-noise ratio >90 dB, A – unweighted

Harmonic distortion at full load / 1 kHz < 0.03 % Channel separation > 42 dB

Input impedance > 20 k, Ωe l. balanced

Ambient temperature during operation 5 °C to +55 °C

Relative humidity 40% to 93%, (no condensation)

Housing color gray, similar to RAL 7016

Dimensions (B x H x T) 483 x 88 x 402 mm / 2 HU, 19”

Related products